Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8918377
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > The gantry Zhengzhou | Zhengzhou door frame manufacturers do in [Zheng Xin scaffolding】
Information Name: | The gantry Zhengzhou | Zhengzhou door frame manufacturers do in [Zheng Xin scaffolding】 |
Published: | 2012-11-09 |
Validity: | 90 |
Specifications: | No |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | The gantry Zhengzhou | Zhengzhou gantry manufacturers do in [Cheng Xin scaffolding, scaffolding use of the one φ48 * 3 steel pipe and fasteners scaffolding erection dual Bent, the pole lower support in labor 16 I-beam production level cantilevered beam, I-beam at the ends of welding two φ25 short steel head, spacing aircraft horizontal distance, in order to steel pipe sleeve above. I-beam cantilevered top with side rope and the upper layer of the beam or wall studs pull then, I-beam with embedded reinforcement ring fixed inside the one end of the floor. Second, the site of the I-beam cantilever balcony or cantilevered member pad 20cm ~ 30cm thick pieces of wood, the lower part of the I-beam to prevent a balcony or cantilevered member force. Third, the basic data of the scaffolding single tube pole, double scaffolding of steel fasteners, shelf width of 1050mm, step 1800mm, maximum vertical distance 1800mm, within the pole from the wall 350mm2 natural soil to temporary floor scaffolding top three, three Cantilevered scaffolding to take on No. 16, I-beam above the top. , Scaffolding cantilevered structure in claim 1, the basic structure is in two parts: First, the main force suspension pick-beam bracket; Second, cantilevered I-beam bracket as the entire construction ...... platform supported by steel pipe buckle The scaffolding the pieces double scaffolding role with general-row. Cantilevered I-beam support dead loads and construction live load to bear its own weight and the upper from the scaffolding frame body, part of the wind load, and passes it to the building. 2, I-beam cantilever beam and oblique support this scaffolding outside the main force component, its erection must be strictly in accordance with the general part of the balcony part of the corner parts of the construction requirements for installation ...... for. The main four corners of the sun angle parts oblique support, the oblique supporting the shelf with steel pipe with a diameter of 48 mm, the lower end of the embedded iron welded steel pipe connection on the I-beam of the upper end of the cantilever frame, forming a triangle oblique support. 4, I-beam pick a the double scaffolding pole beam on one-to-one correspondence, the upper part of the same general-row scaffolding erection of double row. 5, the outer frame every erection of a maximum height of 13 Step frame, the first cantilevered structure inversion for each full 13 step frame or pick at least 8 layers. Cantilevered structure of the 16th-beam cantilever beam, the outside pick out perpendicular to the outer wall 1.5m in the exterior wall anchorage length of 2.3 m. 7, No. 16, I-beam cantilever beam singled out φ38 × 3.0mm steel pipe end welded casing, a length of 100mm, as the base of the double scaffolding, welding pull set corresponding with double scaffolding pole position. 1.5-2 times the length of the cantilever beam the inside as the outside, the end and the fulcrum of the inside diameter of 16 round steel bent anchor the length embedded and board Concrete pouring at the same time, plugged with a wooden needle fixed. |
Admin>>>
You are the 10506 visitor
Copyright © GuangDong ICP No. 10089450, Zhengzhou Zheng Xin Scaffolding Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 10506 visitor
Copyright © GuangDong ICP No. 10089450, Zhengzhou Zheng Xin Scaffolding Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility